抗菌防螨整理劑

TexTrit? Black Widow Mite

TexTrit? Black Widow Mite也叫黑寡婦?，是有機菊酯類高分子抗菌防螨整理劑，適用于幾乎所有類型的纖維，如：棉，粘膠，滌綸，尼龍等天然、合成纖維及混紡織物。即可應用在針織物、梭織物、家紡產品、裝飾用布等紡織品。本產品可以抑制以下細菌：大腸桿菌、白色念珠菌等，有效防止螨蟲的生長、繁殖，賦予紡織品抗菌防螨功能

一、物化性能             

外    觀         偏淡黃色的半透明液體  

離 子 型         陽離子

主要成份         有機菊酯

Ph    值         7

溶 解 性         易溶于水

二、使用方法

首先稱取抗菌劑TexTrit? Black Widow Mite，攪拌同時加水，然后稀釋到所需要的濃度，按照如下工藝進行生產：

1．浸軋法

TexTrit? Black Widow Mite   20-40g/L

交聯劑TexTrit?HFM-2  20g/L

pH值   6左右

軋液率   70-80%

工藝   110℃烘干  然后150℃定型 60-90秒

2. 浸漬法

TexTrit? Black Widow Mite   1-3%

交聯劑TexTrit?HFM-2         1-2%

pH值   6左右

工藝  浴比  1:10

處理?xiàng)l件     20℃浸漬處理20-30分鐘，脫水（帶液率60-100%），烘干。

3. 噴灑法

配成50-60g/L(根據實際情況配置相應要求的濃度)的溶液， 噴灑在需處理的產品表面， 自然晾曬或烘干。

注意事項

1.化料時用冷水或溫水（約30-40℃），可保證產品良好的加工穩定性和抗菌效果.

2.但如果使用一部分助劑如纖維消光劑，整理效果會有所下降；或織物的組織結構過于疏松對抗菌檢測也有影響。

3.與其它陰離子型等助劑復配使用時，務請通過預備試樣確認相容穩定性。

貯    存

TexTrit? Black Widow Mite 包裝：25KG塑料桶，貯存期為 12 個月。                                                               室內存放，避免高溫、嚴寒。

Anti-Bacteria and Anti-Mite

Finishing Agent

TexTrit? Black Widow Mite

Black Widow Mite is a kind of organic biguanide macromolecule anti-bacterial and anti-mite finishing agent, which is suitable for almost all kinds of fibers such as cotton, viscose, polyester, nylon and other natural, synthetic fibers and blended fabrics. It can be used in knitwear, woven fabric, home textile products, decorative fabric and other textiles.

This product can inhibit the following bacteria: gram-positive/negative bacteria, mold, yeast, etc. It cuts off the biological nutrition source of mites, effectively restrains the growth and reproduction of mites, thus endowing textiles with anti-bacterial and anti-mite functions.

Physical & chemical properties:           

Appearance:    Colorless transparent liquid with light yellowness

Ionicity:        Cationic

Main content:   Biguanide complex

pH value:       7

Solubility:      Soluble in water

Usage:

First, weigh and take Black Widow Mite, stir it while adding water, then dilute it to the required concentration, and use it in the production according to the following process:

1. Padding method

Black Widow Mite: 20-40g/L

TexTrit?HFM-2: 20g/L

pH: About 6

Liquid retention rate: 70-80%

Process: Dry at 110 ℃, and heat set at 150 ℃ for 60-90 seconds

2. Impregnation method

Black Widow Mite: 1-3%

TexTrit?HFM-2: 1-2%

pH: 6

Process: Bath ratio 1:10

Treatment condition: Impregnation at 20 ℃ for 20-30 minutes, dehydration (liquid retention rate at 60-100%) and drying.

3. Spray method

Prepare a solution of 50-60g/L (configure the required concentration according to the actual situation), spray it on the surface of the product to be treated, and dry it naturally or bake it.

Characteristics:

1. The product has high bactericidal ability, and has obvious inhibitory effect on Escherichia coli, Staphylococcus aureus, Salmonella and Pseudomonas aeruginosa, etc.

2. It has good compatibility with conventional softeners and is suitable for many processes such as dip rolling, dipping, spraying, etc.

3. The product is non-toxic, non-irritating to the skin, compliant with REACH and OEKO-TEX 100, and free of hazardous substances like formaldehyde, heavy metal ions, etc.

Attentions:

1. Dissolve with cold water or warm water (about 30 ~ 40 ℃) to ensure good processing stability and anti-bacterial effect of the product

2. If some auxiliaries such as fiber matting agent are used, the finishing effect will be compromised; If the structure of the fabric is too loose, the anti-bacterial test result will also be affected.

3. When it is used in combination with other anionic agents, please confirm the compatibility and stability through the prepared samples.

Storage:

Black Widow Mite packaging: 25kg plastic barrel

Storage time: 12 months.