防水防油整理劑 AG-E 081 

AG-E 081 由旭硝子株式會社研發的防水防油劑，賦予各種纖維良好的防水防油性以及耐洗性；穩定性佳，受前道工序的殘留物染料及拼用助劑影響??；不屬于日本消防法的危險物，使用便利。

一、物化性能             

外  觀：乳白色乳液~黃色乳液           

PH  值：酸性

比  重（20℃）：1.1                    

含固量：約30%

離子性：弱陽離子                      

溶解性：易稀釋溶于水                  

二、使用方法

AG－E081通常通過浸軋法加工使用，標準處方的使用濃度根據對象纖維材料、纖維以及使用目的而有所不同。一般情況下使用濃度為：

AG－E081      40-80g/L

干燥條件       100~120℃  1~3分鐘  

焙烘條件       150~170℃  1~3分鐘

注意事項

1.含氟加工劑通常具有加深顏色的效果。請?zhí)崆按_認好加工后的成品顏色。

2.可以拼用抗靜電劑、柔軟劑、滲透劑等其他助劑，請事先充分確認其相容性及對防水防油性的影響。調液時，請先將各種加工助劑至少稀釋2-3倍以上后再混合。

3.稀釋本品時請用40℃以下的水。加工中請將工作液溫度控制在40℃以下。

4. 工作液的PH值請調節在7以下弱酸性，在強酸性和堿性的條件下會影響防水防油性能。

5.請盡早使用調配好的工作液，避免加工液的再使用。

6.請將布料充分洗凈，盡量減少殘留的親水物或離子性物質。

7.由于樹脂渣易堆積在輥筒上，因此輥筒干燥不是理想的方法。

貯    存

1.在搬運本品時，請穿戴合適的個人防護裝備，不要將本品直接接觸身體。

2.不得吸入本品的蒸氣或霧氣。請避免氣化或霧化。

3.本產品請?jiān)?℃-35℃的范圍內，避免直射陽光，密閉保存。在冷凍和長期高溫下的保存，有可能對品質產生不好的影響。

4.將本產品從容器中取出時，請先攪拌均勻。

5.本資料記載的內容僅提供對用戶有用的信息，并不作任何保證。

Waterproof and Oil-proof

Finishing Agent

TexTrit? AG-E 081

AG-E 081  is a water and oil-repellent agent developed by Asahi Nippon Co., Ltd. It has good water and oil repellency, wash durability and stability for all kinds of fibers. It is little affected by the residual dyes and mix-used agents in the previous process. It is not a dangerous substance in the Japanese Fire Service Act. It is convenient to use.

Physical & chemical properties:             

Appearance:     Milky white emulsion - yellow solution

pH:              Acidic

Specific gravity (20 ℃): 1.1

Solid content:    About 30%

Ionicity:          Weak cationic

Solubility:        Easily dilutable and soluble in water

Usage:

AG-E081 is usually used in padding. The concentration of the standard recipe varies according to the target fiber material, fiber and use purpose. In general, the use concentration is:

AG- E081: 40- 80g/L

Drying condition: 100-120 ℃ for 1-3 minutes

Baking condition: 150-170 ℃ for 1-3 minutes

Attentions:

1. Fluorinated finishing agent usually has the effect of deepening the color. Please confirm the color of the finished product in advance.

2. Antistatic agent, softener, penetrant and other auxiliaries can be mix-used. Please fully confirm their compatibility and influence on water and oil-resistance in advance. When preparing, please dilute all kinds of finishing agents at least 2-3 times before mixing.

3. Please use water below 40 ℃ when diluting the product, and control the working solution’s temperature below 40 ℃ during processing.

4. Please adjust the pH value of the working solution below 7 (weak acidic). Strong acidic and alkaline conditions will affect the waterproof and oil-proof performance.

5. Please use the prepared working solution as soon as possible to avoid deposition in the solution.

6. Please wash the fabric to be treated thoroughly to minimize the remaining of hydrophilic or ionic substances.

7. Since resin slag is easy to accumulate on the roller, roller drying is not an ideal method.

Storage:

1. When carrying this product, please wear appropriate personal protective equipment and do not touch the body directly.

2. Do not inhale the steam or vapor of this product. Please avoid vaporization or atomization.

3. Please keep the product in the range of 5-35 ℃, away from direct sunlight and keep it sealed. It is possible to have a bad effect on the quality if it is stored in freeze or constant high temperature.

4. When taking the product out of the container, please mix it evenly first.

5. The records in this document only provide useful information for users, without any guarantee.