阻燃整理劑 TexTrit? Pyroman

阻燃整理劑TexTrit? Pyroman是一種無鹵的滌綸用阻燃劑，能夠有效阻止滌綸紡織品火焰蔓延，處理阻燃劑TexTrit? Pyroman的面料被賦予難燃的防護功能，持久性及耐水洗性強，長期有效地發揮阻燃功能。適合全滌面料和部分滌綸錦綸混紡織物。

一、物化性能             

外 觀            無色至淺黃色透明粘液

離 子 性         弱陽離子

主要成分         含磷化合物

pH值             2～4

溶 解 性         可溶于水

二、使用方法

阻燃劑TexTrit? Pyroman整理的方法是浸軋法。在阻燃處理前需要做堿減量處理，以改變滌綸的吸濕性、手感，有效去除織物表面的雜質，顯著提高阻燃整理效果。

工藝配方：

阻燃劑TexTrit? Pyroman      40～80 g/L

工作液的配制：

在配液槽中加入70～80%的水，再加入阻燃劑TexTrit? 火人，攪拌，然后加入其他助劑（需預先試驗其是否影響阻燃效果），并加入至規定刻度，攪拌均勻。配好的工作液8小時應用完。

工藝流程：

織物  → 二浸二軋（軋液率60～70%）→ 烘干（80～100℃）→ 焙烘（170～190℃×1～3min）→ 水洗 → 烘干

注意事項

1.配制好的溶液請于8小時內使用

2.對一些特殊染料，生產前應做色光變化小試

3.上述工藝配方和工藝過程根據具體加工條件作適當調整

4.焙烘溫度必須嚴格控制，否則影響耐洗性和阻燃效果

貯    存

包裝： 50KG\60KG\70KG塑料桶，貯存期為12個月。開包使用后應確保容器密閉

室內存放，避免高溫、嚴寒。

Flame Retardent Finishing Agent

TexTrit? PyroMan

PyroMan is a new type  halogen-free flame retardant finishing agent, which can effectively prevent the spread of flame. The fabric treated with PyroMan is endowed with flame-retardant protection, which is highly durable and wash resistant, constantly and effectively retarding flames. It’s suitable for polyester fabric and part of polyester-nylon blends.

Physical & chemical properties:             

Appearance:        Colorless to light yellow transparent mucus

Ionicity:            Weak cation

Main components:   Phosphorus compounds

pH value:           2-4

Solubility:          Soluble in water

Usage:

The finishing method of PyroMan is padding. Alkali peeling is recommended before flame retardant treatment to improve the moisture absorption and hand feel of polyester and effectively remove impurities on the textile surface, thus significantly improving the effect of flame retardant finishing.

1. Recipe:

PyroMan: 40-80g/L

2. Preparation of working solution:

Add 70-80% water into the mixing tank, then add the agent RINGECOLIVE? PyroMan, stir it, and then add other auxiliaries (necessary to test  in advance whether they affect the flame retardant effect), then dilute to the specified scale, finally stir evenly. The prepared working solution should be consumed in 8 hours.

3. Process:

Fabric → dip and roll twice (Liquid retention rate: 60-70%) → drying (80-100 ℃) → baking (170-190 ℃ × 1-3min) → washing → drying

Attentions:

1: Please consume the prepared solution within 8 hours

2: For some special dyes, a sample test for color change should be done before production

3: The above recipe and process should be adjusted according to specific processing conditions

4: The baking temperature must be strictly controlled, otherwise the wash durability and flame retardant effect will be compromised.

Storage:

1. Packaging:50/60/70Kg/plastic barrel

2. Storage period: 12 months

3. Ensure the container tightness after unpacking