東莞市日寶電子科技有限公司主營：德國schutze噴槍-中國總代理

東莞市日寶電子科技有限公司

GZ-MKDD/S噴霧閥

功能特點：1.采用棘輪式調節閥，方便調節流量；

2.噴嘴口徑：0.2、0.3、0.5、0.8、1.0、1.2、1.5、2.0mm

3.噴涂形狀從圓形到扇形可調節；

4.集成霧化空氣閥，控制前置和后置，凈化空氣；

5.可選配防粘噴嘴和空氣帽。

適用范圍：

        可噴：油、冷卻油、清洗油、潤滑脂、拉伸油、膠水、油墨...

        行業：制鞋行業、機械制造行業、汽車行業、冶金行業、鋼條行業、

點膠行業、電子行業......

技術參數 

        材料壓力    max.35bar          周期         每秒30次循環

       控制空氣壓力 min.5-6bar          規格      115*80*22mm（含電磁閥）

霧化空氣壓力  max.0.5-5bar        重量             530g

槍體材質    黃銅，化學鍍鎳     槍針噴嘴材質    進口不銹鋼

產品詳細說明:MKDD/S

The spray valves of series MKDD – S are designed for the application of glues and adhesives.
Depending on air cap this spray valve sprays in flat- or roundspray. Depending on viscosity of fluid, the
application can be adjusted individually via nozzle dimension, atomizing air pressure and material
pressure. The supply of atomizing air, control air and material should be done via three hoses. Spray
valves are precision tools. Always keep clean and observe minimum instructions to maintain a long
usefull life of the valve.

Measurements:
with air cap flatspray = 130mm x 22mm x 80mm
with air cap roundspray = 127mm x 22mm x 80mm
Weight = approx. 510g
Control air pressure = 5 – 6 bar
Atomizing air pressure = as required, but at least 0,5 bar less then control air pressure
Material Pressure = max. 35 bar

Available dimensions: 0,2 / 0,3 / 0,5 / 0,8 / 1,0 / 1,2 / 1,5 / 2,0 and 2,5mm