產品名稱：迷你水位計

品牌：Solinst

產地：加拿大

型號：102M

102M 迷你水位計有25 m 和 80 ft 兩種長度可供選擇?？蛇x擇 P4 或 P10 探頭。

激光標記同軸電纜安裝在一個方便的小卷軸上，重量輕，可輕松放入迷你手提箱或背包中。每毫米或每 1/100 英尺標記準確的電纜。

Solinst 102 型水位計用于測量地下水位，尤其是在小直徑管和壓力計中，或者在需要靈活組件以通過井下儀器的情況下。

4 mm (0.157") 或 10 mm (3/8") 直徑不銹鋼探頭

LED燈和響亮的蜂鳴器指示水位

調整靈敏度以適合您的應用

清晰標記的電纜，具有更大的柔韌性和耐磨性

激光打標 102 型水位計用于在小直徑應用中準確測量地下水位。

102 型水位計采用兩種小直徑探頭設計，連接到窄同軸電纜，安裝在符合人體工程學設計的堅固卷軸上。一個標準的 9 伏電池，安裝在一個易于取用的電池抽屜中，為水位計供電。

當探頭進入水中時，電路完成，將信號發送回卷軸，在那里會激活燈光和清晰可聞的蜂鳴器。然后通過直接從井套管或鉆孔頂部的電纜讀取讀數來確定水位。

靈敏度控制允許蜂鳴器在級聯水中按比例縮小或關閉，并確保在高電導率和低電導率條件下都能發出清晰的信號。

激光打標電纜：

同軸電纜具有耐用的聚氨酯護套，每毫米或每 1/100 英尺在電纜上精確地激光蝕刻永久性標記。

電纜卷軸平穩，保持柔韌性，長度為 30 m – 300 m (100 ft – 1000 ft)。

編織銅外導體提供柔韌性，絞合不銹鋼中心導體提供強度。它易于維修和拼接。

102 型水位指示器探頭設計靈活。探頭尖端采用嵌入式設計，以**限度地減少級聯水中的錯誤信號。

P10：直徑 10 毫米。x 70 毫米長（3/8 英寸 x 2.75 英寸）不銹鋼，帶有 10 個不銹鋼砝碼，重 174 克（6.14 盎司）。該探頭是大多數水位測量應用的理想選擇。靈活的配重組件可輕松進入井并保持電纜筆直懸掛在監測井中。

P4： 4 毫米直徑。x 38 毫米長（0.157 英寸 x 1.5 英寸）不銹鋼重 10 克（0.35 盎司），無砝碼。它非常適合淺應用和非常窄的直徑，尤其是 Solinst CMT 系統、DrivePoint 滲壓計或狹窄開口管的通道。

低成本

? 價格低廉的Solinst 品質

狹窄

? 4 mm (0.157") 直徑探頭

長壽

? 堅固、耐腐蝕的組件

? 堅固、靈活的電纜易于拼接

? 更換探頭、電纜和零件

準確的

? 每毫米或 1/100 英尺的精確標記

? 可追溯至國家標準

標準卷軸具有易于取用的電池抽屜、精心設計的制動組件和方便的提手。它采用人體工程學設計，使用舒適，放置在地面上時穩定。它有一個開/關靈敏度開關、燈、蜂鳴器、電池測試按鈕，并帶有一個磁帶導向器。

迷你卷軸堅固，但非常緊湊且易于攜帶。它還具有開/關靈敏度開關、指示燈、蜂鳴器和電池測試按鈕。

卷筒工作溫度：    -20°C 至 +50°C

電纜/探頭的工作溫度：    -20°C 至 +80°C

接液材料（電纜/探頭）：    聚氨酯、不銹鋼、Delrin、Viton、聚烯烴（僅限 P10）

卷盤 IP 等級：    IP64（防塵防濺）

電導檢測閾值：    P10：40 μS/cm P4：100 μS/cm

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。

英文原文：

The laser marked coaxial cable is mounted on a convenient small reel that is light-weight and fits easily into a mini carrying case or backpack. The accurate cable is marked each millimeter or every 1/100 ft.

The 102M Mini Water Level Meter is available in 25 m and 80 ft lengths. There is the choice of the P4 or P10 Probe.

Measure Water Level & Draw Down：

4 mm (0.157") or 10 mm (3/8") diameter stainless steel probes

P10 has segmented weights for flexibility

LED Light and loud buzzer indicates water level

Adjust sensitivity to suit your application

Clearly-marked cable with greater flexibility and abrasion-resistance

The Laser Marked Model 102 Water Level Indicator is designed to accurately measure groundwater levels in small diameter applications.

The Solinst Model 102 Water Level Indicator is designed to measure groundwater levels, especially in small diameter tubes and piezometers, or where a flexible assembly is needed to get past down hole instrumentation.

Also available from Solinst, are the Model 101 Water Level Meter and 101B Water Level Meters, which feature easy-to-read, easily repaired flat tape. (See Model 101 Water Level Meter Data Sheets).

Operating Principles：

The Model 102 Water Level Meter uses a choice of two small diameter probe designs, attached to a narrow coaxial cable, fitted on a sturdy ergonomically designed reel. A standard 9 volt battery, housed in an easy-access battery drawer, powers the Water Level Meter.

When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the cable at the top of the well casing or borehole.

A sensitivity control allows the buzzer to be scaled back or turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.

 

Laser Marked Cable：

The coaxial cable has a durable polyurethane jacket with permanent markings precisely laser etched on the cable every each millimeter or every 1/100 ft.

The cable reels smoothly, remains flexible, and comes in lengths from 30 m – 300 m (100 ft – 1000 ft).

A braided copper outer conductor gives flexibility and a stranded stainless steel central conductor gives strength. It is easy to repair and splice.

Narrow Diameter Probes：

Model 102 Water Level Indicator Probes are designed for flexibility. The probe tips use a recessed design to minimize false signals in cascading water.

P10: 10 mm dia. x 70 mm long (3/8" x 2.75") stainless steel with 10 stainless steel weights, weighing 174 g (6.14 oz). This probe is ideal for the majority of water level measurement applications. The flexible weight assembly allows easy well access and keeps the cable hanging straight in monitoring wells.

P4: 4 mm dia. x 38 mm long (0.157" x 1.5") stainless steel weighing 10 g (0.35 oz), with no weights. It is ideal for shallow applications and for accessing very narrow diameters, especially the channels of the Solinst CMT System, DrivePoint Piezometers or narrow open tubes.

Water Level Meter Features

Low Cost

? Solinst quality at a low price

Narrow

? 4 mm (0.157") diameter probe

Long Life

? Rugged, corrosion resistant components

? Strong, flexible cable is easily spliced

? Replacement probes, cables and parts

Accurate

? Precise markings every mm or 1/100 ft

? Traceable to national standards

Water Level Meter Reels：

The standard reel has an easy access battery drawer, a well designed brake assembly, and convenient carrying handle. It has been ergonomically designed to be comfortable in use and stable when placed on the ground. It has an on/off sensitivity switch, light, buzzer, battery test button, and comes with a tape guide.

The mini reel is sturdy, yet very compact and easy to carry. It also has an on/off sensitivity switch, light, buzzer, and battery test button.

102 Water Level Meter Specifications：

Operating temperature of reel:    -20°C to +50°C

Operating temperature of cable/probe:    -20°C to +80°C

Wetted materials (cable/probe):    Polyurethane, stainless steel, Delrin, Viton, Polyolefin (P10 only)

Reel IP rating:    IP64 (dust and splash proof)

Conductivity detection threshold:    P10: 40 μS/cm P4: 100 μS/cm