進口帶過濾電磁閥德國洛克進口品牌
價格
訂貨量(臺)
¥2600.00
≥1
店鋪主推品 熱銷潛力款
萦萫萧萬萤萦萧营萩萧营
在線客服
萊恩泵閥制造(珠海)有限公司
店齡5年 企業認證
聯系人
葉工
聯系電話
萦萫萧萬萤萦萧营萩萧营
經營模式
生產商,
所在地區
廣東省珠海市
進口帶過濾電磁閥德國洛克進口品牌
進口帶過濾電磁閥優點:
先導式結構,閥芯均為不銹鋼活塞,活塞環不會被介質中的雜質卡死,動密封性能高,壽命長;活塞與金屬閥腔不產生直接摩擦,閥體安裝方向無限制;專制線圈,不易燒毀;長時間停止動作重新啟動,動作同樣靈敏;泄漏量零;使用壽命長達100萬次以上。
進口帶過濾電磁閥工作原理:
常閉:不通電的時候,電磁閥處于關閉狀態;通電之后,電磁閥卸壓孔打開,主閥口由介質的壓力推動打開,含有雜質的介質先通過過濾網,過濾掉雜質之后,再通過主閥口流向出口,斷電之后,電磁閥關閉。
常開:不通電的時候,電磁閥先導孔處于打開狀態,含有雜質的介質先通過過濾網,過濾掉雜質之后,再推動活塞打開主閥口,流向出口,通電之后,電磁閥關閉。
進口帶過濾電磁閥描述:
德國《DE LOCKE》洛克進口帶過濾電磁閥是安裝在管道中,由于介質中含有固體雜質,防止雜質流入到電磁閥內部密封件處,卡死電磁閥,導致電磁閥不能正常關閉而開發的一款自過濾電磁閥。該閥在進口處自身集成了過濾網,流體介質中的固體顆粒雜質被過濾網完全過濾掉,大大提升了電磁閥的使用壽命。除此之外,該閥還有結構簡單,體積小,不用另外再增配過濾設備,大大的降低了成本等諸多優點。
Description of inlet solenoid valve with filter:
Germany "de Locke" imported filter solenoid valve is installed in the pipeline, because the medium contains solid impurities, to prevent impurities from flowing into the internal seal of the solenoid valve, blocking the solenoid valve, resulting in the solenoid valve can not be closed normally. The valve integrates a filter screen at the inlet, and the solid particles in the fluid medium are completely filtered by the filter screen, which greatly improves the service life of the solenoid valve. In addition, the valve has many advantages, such as simple structure, small volume, no additional filtration equipment, greatly reducing the cost and so on.
進口帶過濾電磁閥技術參數:
公稱通徑 | DN1~200mm |
原理結構 | 先導活塞式 |
環境溫度 | -10~+50℃ -40~+80℃ |
線圈溫度 | <+50℃、<+85℃ |
控制方式 | 常閉、常開、自保持 |
公稱壓力 | 0~50Mpa |
閥體材質 | 鑄鋼、不銹鋼304、316 |
適用介質 | 氣、水、油、蒸汽、燃氣、腐蝕性流體 |
介質溫度 | -200~+600℃ |
介質粘度 | 小于50CSt (大于50時需定制) |
防護性能 | 防水、防塵、防爆(Exd IICT5)、防腐 |
閥芯材質 | 均為不銹鋼 |
接線方式 | 接線座式、引線式、插頭式 |
電源電壓 | DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V; AC24V、AC36、AC110V、AC127V、AC220V、AC380V |
連接方式 | 法蘭、內螺紋、外螺紋、卡套、焊接 |
泄 漏 量 | 零泄漏 |
備 注 | 特殊型可定制 |
Nominal diameter:DN1~200mm
Principle structurePilot piston type
ambient temperature:-10~+50℃ -40~+80℃
Coil temperature:<+50℃、<+85℃
control mode:Normally closed, normally open, self retaining
Nominal pressure:0~50Mpa
body material:Cast steel, stainless steel 304, 316
Applicable medium:Gas, water, oil, steam, gas, corrosive fluid
Medium temperature;-200~+600℃
Medium viscosity:Less than 50cst (customized when more than 50)
Protection performance:Waterproof, dustproof, explosion proof (Exd iict5), anticorrosion
Material of valve core:All are stainless steel
Connection mode:Terminal block type, lead type and plug type
supply voltage:
DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V;
AC24V、AC36、AC110V、AC127V、AC220V、AC380V
Connection mode:Flange, internal thread, external thread, ferrule, welding
Leakage:Zero leakage
remarks:Special type can be customized