高速公路拱形骨架護坡模具這種模具主要用在各個高速公路、高速鐵路上。種類多樣，生產各種各樣的拱形護坡模具。模具表面光滑，證明模具的質量好壞，模具的使用壽命，模具的硬度，模具的耐磨性等等，都是好模具所具備的必要條件這種骨架護坡模板這主要是與一些公路建造工程同步施工，其主要是在山坡兩側進行施工，可以避免山石滾路加固土壤減少水土資源的流失。         

高速公路拱形骨架護坡模具分一個內膜，一個外膜，將兩塊模具拼裝起來之后就可以往中間進行灌漿操作。一般的情況下灌漿完成之后經過六到八個小時的自然晾曬風干基本上就可以脫模了。高速公路拱形骨架護坡模具是常見的高速公路、高速鐵路護坡模具之一。常規尺寸直徑高度一般為50cm、60cm、 70cm 每套的重量約250公斤,一個拱形護坡模具分為四節，用螺絲固定的，因此-一個工人就可以操作完成。拱形護坡模具帶擋水塊，主要起到收水的作用。This kind of mould is mainly used in various expressways and high-speed railways. Variety, production of a variety of arch slope protection mold. The smooth surface of the mold proves that the quality of the mold, the service life of the mold, the hardness of the mold, the wear resistance of the mold and so on are all the necessary conditions for a good mold. This kind of skeleton slope protection formwork is mainly constructed simultaneously with some highway construction projects, mainly on both sides of the mountain slope, It can avoid rolling road, reinforce soil and reduce the loss of water and soil resources.

The mould of Expressway arch skeleton slope protection is divided into an inner membrane and an outer membrane. After the two moulds are assembled, the grouting operation can be carried out in the middle. In general, after grouting, after six to eight hours of natural air drying, basically demoulding can be done. The arch skeleton slope protection mould of expressway is one of the common slope protection moulds of Expressway and high-speed railway. The conventional size, diameter and height are generally 50cm, 60cm and 70cm, and each set weighs about 250kg. An arched slope protection mold is divided into four sections and fixed with screws, so it can be operated by one worker. The arched slope protection mould is equipped with water retaining block, which is mainly used to collect water.