進口先導活塞式氣體減壓閥德國洛克型號齊全

減壓閥的安裝和維護應注意以下事項： 

1、減壓閥為了操作和維護方便，該閥一般直立安裝在水平管道上。

2、減壓閥安裝時應注意使管路中介質的流向與閥休上所示箭頭的方向一致。

減壓閥為了防止閥后壓力超壓，應在離閥出口不少于4M處安裝一個安全閥。

進口先導活塞式氣體減壓閥規格參數：

◆公稱通徑：DN15-DN500

◆公稱壓力：1.0Mpa-16Mpa

◆適用溫度：-20℃≤T≤425 ℃

◆適用介質：水、蒸汽、油品

◆閥體材質：鑄鐵、鑄鋼、碳鋼、不銹鋼

◆連接方式：法蘭連接

流量系數：

DN  15  20  25  32  40  50  65  80  100  125  150  200  250  300  350  400  500

Cv  1  2.5  4  6.5  9  16  25  36  64  100  140  250  400  570  780  1020  1500

進口先導活塞式氣體減壓閥主要零件材料： 

主要零件材料

◆閥體，閥蓋，底蓋 WCB

◆閥座，閥盤 2Cr13

◆缸套 2Cr13/25(鍍硬鉻)

◆活塞 2Cr13/銅合金

◆活塞環 合金鑄鐵

◆導閥座，導閥桿 2Cr13

◆膜片 1Cr18Ni9Ti

◆主閥彈簧 50CrVA  

◆導閥主彈簧 50CrVA  

◆調節彈簧 60Si2Mn         

進口先導活塞式氣體減壓閥產品簡介：

進口先導活塞式氣體減壓閥屬于先導活塞式減壓閥。由主閥和導閥兩部分組成。主閥主要由閥座、主閥盤、活塞、缸套、彈簧等零件組成。導閥主要由閥座、閥瓣、膜片、彈簧、調節彈簧等零件組成。通過調節彈簧壓力設定出口壓力，利用膜片傳感出口壓力變化，通過導閥啟閉驅動活塞調節主閥節流部位過流面積的大小，實現減壓穩壓功能。

Import pilot piston type gas pressure reducing valve belongs to the pilot piston type pressure reducing valve. By the main valve and pilot valve composed of two parts. The main valve mainly by the valve seat, the main valve plate, piston, cylinder liner, springs and other parts. Pilot valve is mainly composed of valve seat, valve disc, diaphragm, spring, adjusting spring and other parts. By adjusting the spring pressure to set the outlet pressure, the diaphragm pressure sensor is used to adjust the flow area of the throttle part of the main valve through the pilot valve opening and closing to drive the piston.