東莞市臺銘光電科技有限公司
店齡6年 · 企業認證 · 廣東省東莞市
手機掃碼查看 移動端的落地頁
東莞市臺銘光電科技有限公司
主營產品: 視覺光源led燈珠, 插件led燈珠, 大功率led燈珠, 貼片led燈珠, 紅外線發射管, 全光譜植物led燈珠, 紅外線接收頭有, 0805貼片led燈, 0603貼片led燈, 0402貼片led燈, 1206貼片led燈, 5050貼片led燈, 3535貼片led燈, 5730貼片led燈, 0201貼片led燈, 1615貼片led燈, 小蝴蝶led燈珠, 食人魚led燈珠, COB 面光源
直插3mm橙燈LED燈珠-圓頭白發橙光-發光二極管-臺銘光電
價格
訂貨量(個)
¥0.01
≥10000
店鋪主推品 熱銷潛力款
ῡῤῥῨῧῠῤῥῧῥῧ
在線客服
東莞市臺銘光電科技有限公司
店齡6年 企業認證
聯系人
陳子華
聯系電話
ῡῤῥῨῧῠῤῥῧῥῧ
經營模式
生產廠家
所在地區
廣東省東莞市
- 應用范圍:照明、指示、背光等
- 產品描述:臺銘直插式LED,體積小,高亮度,能耗低,應用于照明,背光等領域。
- 注:亮度、角度、色溫、紫光波段均可按客戶要求做貨。
Type
規格/型號Emitting Color
顏色Material
原材料View Angle
發光角度VF(V)
電壓IV (MCD)
亮度WL(nm)
波長IF(MA)
電流Typ Max Min Typ Min Max TM-L03R-E
(紅光)Red AlGaInP 30° 1.8 2.4 2000 4000 620 630 20MA TM-L03Y-E
(黃光)Yellow AlGaInP 30° 1.8 2.4 300 600 585 595 20MA TM-L03O-E
(黃綠)Yellow Green AlGaInP 30° 1.8 2.4 50 100 565 575 20MA TM-L03O-E
(橙光)orange AlGaInP 30° 1.8 2.4 300 600 600 610 20MA TM-L3CG-E
(翠綠)Green InGaN/GaN 30° 2.8 3.4 1200 8000 520 530 20MA TM-L3B-E
(藍光)Blue InGaN/GaN 30° 2.8 3.4 300 500 460 475 20MA TM-L3UV365-E
(紫光)Purple InGaN/GaN 30° 2.8 3.4 6 8 365 370 20MA TM-L03UV370-E
(紫光)Purple InGaN/GaN 30° 2.8 3.4 10 13 370 375 20MA TM-L3UV380-E
(紫光)Purple InGaN/GaN 30° 2.8 3.4 14 18 380 385 20MA TM-L03UV400-E
(紫光)Purple InGaN/GaN 30° 2.8 3.4 60 70 395 400 20MA TM-L03UV405-E
(紫光)Purple InGaN/GaN 30° 2.8 3.4 70 80 400 405 20MA TM-L03UV410-E
(紫光)Purple InGaN/GaN 30° 2.8 3.4 80 90 405 410 20MA TM-L3NB55-E
(白光)White InGaN/GaN 30° 2.8 --- 6000 --- 5500 6000 20MA TM-L3ZB65-E
(白光)White InGaN/GaN 45° 2.8 --- 6000 --- 6500 7000 20MA TM-L3LB80-E
(白光)White InGaN/GaN 30° 2.8 --- 6000 --- 2500 10000 20MA Supporter shaping:
Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.